Saturday, 26 March 2016

Hand Jive: High-Tech Glove Turns Gestures into Music


If you find yourself tapping your hand to a beat while sitting at your desk, in the car or on a park bench, a high-tech glove might be just the gadget to help you turn the tunes in your head into music you can record.

The glove, called the Remidi T8 wearable instrument, is loaded with pressure-sensitive sensors along the fingertips and palm. Its wristband controls how the combination of sounds from each sensor are translated as a user moves his or her hand, according to a post on Kickstarter announcing a project to produce the glove, which is not yet available.
The glove aims to be a very intuitive device for music artists, enthusiasts and disc jockeys to use, according to the company. [Gallery: Futuristic 'Smart Textiles' Merge Fashion with Tech]


Users of the glove will be able to compose music, play and perform on the go, said Mark DeMay, co-founder and chief technology officer at Remidi. It can be thought of as a wearable MIDI controller, DeMay said, referring to the music synthesizers found in recording studios that let producers combine tracks, tweak vocals and adjust tempos.


But the glove is actually much more adaptable than the large synthesizer machines, and can be personalized to create new, custom sounds or remix existing ones, depending on how a user programs it.

"We wanted to give people a fun way to express themselves and start pushing the boundaries of what we can do with musical instruments," DeMay told Live Science.

The idea for the wearable music instrument was born when Remidi founder and CEO, Andrea Baldereschi, and DeMay met while working at Livid Instruments, an Austin, Texas-based company that designs MIDI controllers and mixers for DJs. Baldereschi had been a DJ for a number of years and would always tap out new beats whenever they were working together, DeMay said.

But he often forgot the new melodies before he could get around to recording the music, so Baldereschi decided he wanted to invent a way to record riffs on the go, without being limited to working in rooms with bulky, burdensome digital music systems.

"The digital world has gotten a little bit stagnant in terms of the MIDI controllers," DeMay said. "They all kind of do the same stuff, in the same way. They're all buttons, knobs, LEDs and faders, just in a different arrangement," he said. "The T8 glove is something truly different."

With the T8, a user could start jamming on any surface — a desk, wall, subway seat, park bench, car window, or on their own body. The data from the glove can then be sent to the Remidi app or to other recording software, DeMay said.

The T8 creates different sound intensities and rhythms based on which of its eight sensors you press, what combinations you press, and how long or how hard you press down on each point. And a tiny spinninggyroscope and accelerometer in the glove's wristband measures how fast your hand moves up and down or left and right, and adjusts the tone and tempo of the music you create in real-time.

"The glove's really adaptable as far as what is does," DeMay said. A prototype of the glove won a number of awards for its features and design, including the Marzotto CLN Corporate Price in Milan, and the Jury's Special Prize at the Wearable 2016 Awards in Paris.

Remidi's Kickstarter campaign raised more than $130,000 — nearly triple its original goal of $50,000. People can purchase a T8 for $349 through the company's pre-sale until September, DeMay said. After that, Remidi plans to sell the T8 for $399.

Electrifying Drone Race Tests Pilots' Sky-High Skills


The buzz of the engine roars as a vehicle launches from its start position, accelerates to high speeds and then banks hard around a corner. This may sound like your typical NASCAR event, but this thrilling race actually takes place on a different course — one that's high in the sky.

The Drone Racing League's semifinals for its first race of the season took place yesterday (Feb. 29) in Miami, where drone pilots from around the world gathered to test their chops on an aerial course that includes navigating tight turns, maneuvering through glowing gates and dodging objects throughout the stadium.

Racing at speeds that exceed 80 miles per hour (129 km/h) at times, the skilled pilots don first-person view (FPV) goggles (that show a video feed of what the drones are seeing) to race custom-built drones through a course that weaves in and out of Sun Life Stadium, home of the NFL's Miami Dolphins. [Photos from Above: 8 Cool Camera-Carrying Drones]

Eight pilots racaed in yesterday's semifinals, a field narrowed from the 12 competitors who took part in the first round. The racecourse required pilots to navigate around the stadium, zooming around bleachers, through concession areas, up a spiraling staircase, and then back around the bleachers again, according to a Drone Racing League (DRL) video about the event.

Each of the pilots raced with a custom-built DRL Racer2 drone that has a carbon-fiber frame to protect electronic and camera components, according to the DRL. The drones were also equipped with ultrabright LED lights to make them easy to identify on the racecourse. When pilots put on their flight goggles, they were able to see a video feed from a camera attached to the drone that helps them direct their machine through the course with handheld controllers, according to the league's website.

After yesterday's race, only the four highest-scoring pilots will continue on to the final round. To obtain the highest score, a pilot needed to pass through two checkpoints and cross the finish line in less than 2 minutes, according to DRL officials. The faster a drone flew through the course, the more points the pilot was awarded.

The Drone Racing League's scoring system awards each pilot 50 points for each checkpoint his or her drone passes and for crossing the finish line, according to league officials. In addition, each pilot is awarded 10 points for every second under the 2-minute time cap he or she posts as a final time, DRL officials added.




World's Largest Aircraft Readies for Takeoff


The world's largest aircraft, some 65 feet (20 meters) longer than the world's biggest passenger airliner, is just about ready to leave its hangar near London and take to the skies.
At 302 feet (92 meters) long, the hybrid Airlander 10 — which mixes tech from airplanes, helicopters and airships — even dwarfs the largest passenger airliner, the Airbus A380 (also called the Superjumbo), and boasts a weight of 44,100 lbs. (20,000 kilograms), according to its maker, Hybrid Air Vehicles in Cardington, England. 

In addition to its gargantuan size, the prototype hybrid vehicle (which looks like a massive blimp) has endurance on its side: The Airlander 10 is designed to reach altitudes of up to 20,000 feet (6,100 m) and stay aloft for five days when manned and up to two weeks when unmanned. [Huge Airship: See Photos of the Building of the Airlander 10]

The aerodynamic shape of the helium-filled hull provides 40 percent of the hefty vehicle's lift, according to company officials. Air-filled bags called ballonets in the hull can be inflated or deflated to change the craft's altitude. In addition to remaining buoyant, the Airlander will be able to cruise through the air at up to 91 mph (148 km/h), propelled by its four 350-horsepower, V8 diesel engines, said Hybrid Air Vehicles.


In the latest developments, engineers attached a series of parts to the Airlander's hull, including a massive lower port fin that had to be lifted up by a crane and four turbocharged diesel engines. The payload module, where passengers or cargo will sit, was also fitted beneath the hull and behind the cockpit.

"It's really quite a special machine to fly," said test pilot David Burns, as reported by CNN. "The view from the flight deck is excellent because of the large windows and the airship characteristics, flying at a fairly lowish altitude."

The Airlander 10 could be used for diverse missions, its functionality resting on two qualities: "It can stay in the air for days and even weeks carrying a lot of weight on an ultra-stable platform," Chris Daniels, head of partnerships and communication at Hybrid Air Vehicles. "And it also has the versatility to land and take off from pretty much any surface, including water, carrying up to 10 tonnes [about 22,000 lbs.] of cargo."

With its "ultra-stable platform," the Airlander 10 could be used for search and rescue, patrol and surveying. "This may be coastguard duties, academic research or perhaps a Wi-Fi platform for rock festivals," Daniels told Live Science in an email. "The second use is either passenger flight (think safaris and luxury tourism) or for cargo to remote regions where there aren't good roads or railways, or perhaps an airport doesn't exist."

Before reaching its lofty goals and offering rides to commercial passengers, the Airlander, which reportedly cost $35 million to produce, will complete ground tests and then 200 hours of test flights, according to CNN.

New 'LightningStrike' Plane Will Take Off, Hover & Land Vertically


An unmanned aircraft that can take off, hover and land vertically could be closer to reality, as part of a Defense Advanced Research Projects Agency (DARPA) program to develop these futuristic flying machines. 
DARPA, the government agency charged with developing new military technologies, awarded a contract to Aurora Flight Sciences Corp. to design a new vertical takeoff and landing (VTOL) aircraft, the company announced March 3.

Aurora was one of four companies competing in the first phase of DARPA's VTOL Experimental Plane (X-Plane) program. The other competing companies were The Boeing Co., Karem Aircraft Inc., and Sikorsky Aircraft Corp., according to DARPA. [Supersonic! The 10 Fastest Military Airplanes]

"Aurora is proud to support DARPA on what we all hope to be a truly historic breakthrough in aviation technology," John Langford, chairman and CEO of Aurora, said in a statement. "If successful, VTOL X-Plane’s radically improved flight capabilities could lead to revolutionary advancement of the U.S. military's future mission capabilities."


Langford said Aurora plans to build a demonstrator aircraft, known as LightningStrike, that will have the following qualities:
-Achieve a top sustained flight speed of 300 to 400 knots (345 to 460 mph, or 556 to 740 km/h);
-Raise aircraft hover efficiency from 60 percent to at least 75 percent;

-Present a more favorable cruise lift-to-drag ratio of at least 10, up from 5 to 6. (Aircraft have high L/D ratio if they produce a lot of lift or have a small amount of aerodynamic drag, according to NASA.); and
-Carry a useful load of at least 40 percent of the vehicle's projected gross weight of 10,000 to 12,000 lbs. (4,500 to 5,400 kilograms).

Aurora is collaborating closely with Rolls-Royce PLC and Honeywell International Inc. to reach a number of milestones. For instance, LightningStrike will be the first aircraft to have distributed hybrid-electric propulsion ducted fans, meaning the hybrid propulsion units are spread out along the aircraft to provide thrust for the plane.

LightningStrike will also have an "innovative" synchronous electric-drive system, tilt-wing and tilt-canard-based propulsion for vertical takeoff and landing (a canard is a wing configuration on the aircraft) and high efficiency for both hover and high-speed forward flight, according to Aurora.

The aircraft will be made with a Rolls-Royce AE 1107C turboshaft engine that can power three Honeywell generators and 24 ducted fans that are distributed on the wings and canards. Moreover, LightningStrike'selectric distributed propulsion system is designed to have integrated and distributed ducted fans that, along with the synchronous electric drive system, would help the aircraft efficiently move forward at a high speed, Aurora representatives said.

"The Aurora team's goal is to help redefine the future of vertical flight," said Mark Wilson, chief operating officer of Rolls-Royce LibertyWorks, an advanced aerospace technology research and design unit.
The company is aiming to begin test flight in 2018, company representatives said.

Friday, 25 March 2016

Holy Drones, Batman! Real-Life 'Batplane' Mimics Flexible Wings



When chasing insects for their dinner, bats can perform aerial acrobatics that would shame even the steeliest test pilots. Inspired by the wings that allow bats to pull off such impressive maneuvers, a team of engineers designed new kinds of wing surfaces for drones.
At the University of Southampton in the United Kingdom, a group led by engineering professor Bharathram Ganapathisubramani designed a flexible, membrane wing for small drones, otherwise known as micro air vehicles (MAVs).

MAVs are used for a variety of purposes, including reconnaissance and scientific work. The new membrane wings change shape in response to local conditions in the environment, allowing for more efficient flight. "If you compare a flexible wing to [a] rigid wing, you get far better efficiency," Ganapathisubramani told Live Science. [Biomimicry: 7 Clever Technologies Inspired by Nature]

The team tested its MAV — one that measured about 18 inches (46 centimeters) across — over water near a local beach. The MAV was designed to skim above the surface and land safely, like a seaplane. The membrane is stretched between struts where a stiff wing would ordinarily be, the engineers said. "It just uses a passive membrane that changes shape on its own based on the wind," Ganapathisubramani said.

The early tests were a good start, but Ganapathisubramani wants to take it a step further, he said. Bat wings are membranes stretched between finger bones. The bats' membranes are covered in a network of blood vessels and have muscle, so they can change stiffness and shape depending on what the bat wants to do. The reason bats can change direction so fast and do loops and dives is because they can change their wing shapes, and thus their aerodynamic capabilities, in real time, Ganapathisubramani said.


To get this shape-changing effect, the researchers used a polymer that expands and contracts when a voltage is applied to it. Such polymers have been studied for several years, and can function as a kind ofartificial muscle. Because the amount of contraction depends on the voltage only, the currents can be small, the researchers said. Ganapathisubramani's team has tested designs in a wind tunnel and will be experimenting with the drones over the next few years.
"The idea is, in the future, [we could] put it on the drone and run a voltage through the wing," Ganapathisubramani said. The voltage makes the molecules of the polymer squeeze together, and the material has to expand in another direction, similar to what happens when you squeeze a sponge, he added.

While membranous wings wouldn't be practical on a commercial aircraft, it might be possible to make some of a plane's control surfaces flexible, the researchers said. For example, the ailerons (the hinged sections that form part of the trailing edge of a wing) and the rudder could be made with this kind of polymer on the edges. This could make the aircraft's controls more precise, the scientists said. And enabling a plane to change its wing configuration depending on the weather could translate into fuel savings, along with smoother rides, the researchers added.

For now, though, Ganapathisubramani said, he and his colleagues want to use this technology on drones, and they have done computer modeling to decide exactly how to build the wing surfaces.  For now, though, Ganapathisubramani said, he and his colleagues want to use this technology on drones, and they have done computer modeling to decide exactly how to build the wing surfaces.  

Friday, 11 March 2016

Microsoft reaches out and embraces open-source Eclipse



Once upon a time, when Windows was home to the vast majority of applications, and most of them were written in C++ or Visual Basic, Microsoft’s Visual Studio toolset was king. Most developers had an MSDN subscription and used a variety of Microsoft tools. The Visual Studio IDE (integrated development environment) became one of the most powerful ever built. Now that far more effort is being invested in non-Windows applications than previously, far more development is done using a wide-varieties of IDEs — many of them based on the open-source Eclipse system. Microsoft has now acknowledged and embraced this fact in a big way, by making Eclipse a full-fledged option for those developing for Microsoft’s Azure services or using Visual Studio’s team development features.

Microsoft’s Eclipse-based tools

Microsoft Visual Studio started out as a desktop IDE but has extended over the years into a complete team environment for software developmentMicrosoft has been shipping a number of Eclipse-based tools already, including an Azure Toolkit for Eclipse and a Java SDK for Azure. Its Team Explorer Everywhere already allows Eclipse developers to access Visual Studio’s Team Services from within Eclipse — build, test, and source code control, for example.
What’s new is Microsoft has now integrated its offering with Codeenvy’s tools — which are in turn built on the new Eclipse Che platform. Using Codenvy’s Visual Studio Team Services extension, developers using Microsoft’s tools will be able to create Codenvy workspaces. Microsoft is also adding a pre-configured Codenvy VM to its Azure offerings.

Microsoft and the Eclipse Foundation

Microsoft has worked with the Eclipse Foundation for a long time, but has now officially joined as a Solutions member — timed to coincide with EclipseCon. Even though this won’t mean that Microsoft is embracing the Eclipse IDE as its primary development environment, it is very much in line with Microsoft’s newish “embrace and extend” approach to other popular tools and environments. Ironically, perhaps, at the same time Google has moved to distance itself from Eclipse, by ending support for its Android development plug-in for Eclipse in favor of its own Android Studio offering.
As part of joining the Eclipse Foundation, Microsoft is open sourcing its Team Explorer Everywhere plugin for Eclipse through Github, as well as Azure IoT support through Kura, and Azure Java WebApp support through the Azure Toolkit for Eclipse.

What this means for developers

Microsoft doesn’t seem to be backing away from its commitment to the Visual Studio IDE — it just shipped R-language extensions for the Visual Studio IDE recently, for example — but is instead reaching out to allow those using the Eclipse IDE to be full members of Microsoft-centric development efforts. This is perhaps best typified by the title of one of the sessions Microsoft is giving at EclipseCon, “Integrating Different IDEs with a Common Set of Developer Services.”

AMD launches XConnect, partners with Intel, Razer to drive desktop gaming on laptops


When it comes to gaming, laptop owners have always been stuck between a rock and a hard place. Thin and light systems often portability and convenience, but limited gaming performance. Larger, desktop-replacement systems offer more than enough firepower for gaming, but are typically heavy and fall into the category of “transportable” rather than portable. The handful of external chassis that have been built by various vendors tend to have their own limitations and often require a reboot when changing the graphics mode, or don’t support laptop hibernation. They’re also typically tied to either a specific product family or even a single product SKU.



AMD wants to offer mobile gamers a more flexible option, and it’s partnered with Razer and Intel to make it possible. XConnect is the name of AMD’s driver support and implementation using Thunderbolt external graphics.

AMD XConnect: External graphics done right?

Since we’re talking about the efforts of three different companies, let me break out which manufacturer contributes what.

AMD wrote drivers for its own Radeon GPUs in order to support an external graphics chassis. Radeon cards running Radeon Software 16.2.2 or later are capable of plug-and-play configuration with an external chassis. The new software can monitor which applications are running on an external GPU and offers the option to close current applications and prep the system for safe removal. Unlike previous solutions, you can connect or disconnect an external dock without rebooting the system.

Razer built the first system to support this feature (the Razer Blade Stealth) and is the first company to adopt the BIOS extensions and capabilities required to allow for PCI Express hot-plugging. Razer also built the first desktop chassis (the Razer Core). Right now, the Razer Blade Stealth and Razer Core are the only compatible products on the market, but that will change with future launches.



Intel developed the Thunderbolt 3 standard that makes the entire system function and specifically developed the external graphics specification that ties these components together. While external Thunderbolt chassis have existed for years, these are not necessarily designed for any graphics card and have many of the restrictions mentioned above regarding both hot swapping and reboot requirements.

All three companies have contributed their work back into the general Thunderbolt eGFX system, which means it should be much easier for third parties and other vendors to create their own solutions. The x4 PCI Express 3.0 connection isn’t as fast as a full desktop slot, no, but it’s enough to drive gaming with an average 10% performance hit depending on the title and the GPU.


While these results have been provided by AMD, they’re also running on an ultrabook at 1440p. That’s strong performance all around.

The ecosystem long-term goal

The mobile graphics industry has never developed an ecosystem that allowed for simple or easy graphics upgrades. While the MXM standard defines a specific pin-out for a graphics card, it does not specify the card size or configuration. As a result, two MXM cards from two different systems may be practically incompatible with each other depending on the laptop’s design.
AMD, Intel, and Razer want to solve this problem by introducing a flexible external standard that bypasses all the heat and thermal issues associated with jamming top-end graphics cards into small enclosed spaces. The Thunderbolt eGFX specification isn’t limited to large chassis. At IDF last year, Intel demoed external graphics solutions with a wide number of breakout ports and capabilities that were designed with far more modest TDP requirements. Our sources have indicated those were all using an early version of Thunderbolt external graphics and were powered by AMD hardware.

If laptop manufacturers and third-party component companies buy into this capability, you’ll be able to purchase a chassis from any vendor and use it with any laptop that offers Thunderbolt eGFX. While the chassis would still cost a non-trivial amount of money ($200 to $300 seems a safe bet), the hardware would be upgradeable and compatible with future systems. Intel will maintain backwards compatibility in any future version of Thunderbolt, which means future systems that utilize a hypothetical Thunderbolt 4 should still be backwards compatible with a Thunderbolt 3 dock.

Desktop GPUs also tend to be less expensive than their laptop counterparts and to offer better performance at any given price point. Over time, the chassis could effectively pay for itself by allowing gamers to use less expensive video cards that offer higher overall performance.

Razer has stated that its dock is also compatible with both AMD and Nvidia GPUs, but Nvidia has stayed fairly quiet about this capability. The company added hot-plug support in a driver around CES, but hasn’t said much since. AMD has stated that its XConnect driver will work with the R9 280, R9 285, R9 290, R9 290X, the R9 300 family, and all Fury and Nano products. It will also be compatible with various AMD mobile GPUs and future Polaris hardware.
As someone who has covered the mobile industry for years and watched video cards vanish from lower-end hardware, I’m genuinely excited to see a GPU solution that can meet mobile gamers’ needs without requiring them to buy desktop replacements. This standard appears to solve all of the problems that previously held the industry back. Will customers bite? That’s another question.